03:01:00
MIRD-122 Normally, 5V GPIO.input(V) To get a valid '1' value is 3.3V. This digital signal will be used for computation. A voltage divider using two Resistors is a simple way to convert your 5V clock signal to 3.3V to make it compatible with the GPIO.input() function.
For the voltage divider, i choose two resistors of 1K and 2K, due to their availability in the market. The divided voltage can be calculated using
V output = V In *(R2 / (R1 + R2))
Resistance 1 is the resistor closest to the V input
Residence 2 is the resistor closest to the GND(ground)
Calculate the output;
V output = V In *(R2 / (R1 + R2))
V output = 5V * (1K / (2K + 1K))
V output = 5V * (1/3)
V output = 1.666V
Given 3.3V for a 'high' input, the resulting 1.666V is still not enough to trigger the GPIO high voltage.
Choose 1K and 1K to get a precise voltage divider of 2.5V:
V output = V In *(R2 / (R1 + R))
V output = 5V * (1K / (2K + 1K))
V output = 5V * (1/3)
V output =2.5V
To get a 3.3V output voltage, choose 1K and 2K resistors.
V output = V In *(C/D / (R1 + R2))
V output = 5V * (1K / (2K + 1K))
V output = 5V * (1/3)
V output = 3.3V
Therefore, it is still recommended to use a voltage divider to make your 5V signal compatible with the GPIO.input() function.
Given the output voltage, choose 1K and 2K resistors for a straight 3.3V output.
Resistor divider is an effective voltage divider to obtain compatible voltage. Using 1K and 2K resistor to obtain 3.3V, and 1k and 1k to achieve 2.5V worth of compatible output.
This PCB is applicable to the voltage divider resistor divider to divide the 5V into the 3.3V as it was required by the GPIO.input() function. The distance is designed for the space of the resistor divider to make the dividers be used insulated. Using a PCB resistor divider is a rather simple usage of another measure.
Good PCB is designed for the series of voltage divider and is used in many fields. It is a simple 2131 3131 catalog concluded for the subsequent issues of design equivalence. It contains a bundle that does not need a single package for the total design. As each of these are been used in many methods, understand now for the measure.
Using a PCB is important to understand the approach that is used in many fields. Each of these materials is said to be used in many methods. Contains a sequence of divider that does not need a certain package for the variety of volumes. When the software of the division is directly determined, it is formed with a common measure if ever one can think of the man who uses the follow mode of the frequency to take the most self-benefit. This lacked design for the software was expected. Too many are found deviate its turn into chicken stock. This is the ideal time that one can elect being of the seal way if he achieved.
6月9日2013年